Well here we go again, the new RE274 cam installed. The cam itself is 274 Duration on the inlet and 270 on the exhaust, but it may come out a few degrees more with the 1.5 Ratio rockers. My Re13…
Category: Cams Followers
OK, it’s time to get the motor back on the dyno with a few new bits and see how it stacks up. With a new modified head, again based on a 12G202 head, it has inlet valves of 1.3″ in…
Well I finally got to get this thing on the dyno in it first iteration. Running the 44mm IDF Downdraft weber. See Part 1 Putting on some yellow paint marks on the push rods just to see how they should…
Before reading this, I suggest the reader go back and read Project Small Bore Pt1, Pt2, Pt3 as lot of things in that project are relevant to this project. The beginning of the process of building the 68mm project motor…
There has been alot of talk abut cam followers in the mini (A-series) community of late. So I thought it would be a good idea to go through and explain a few things. When you assemble a motor and wind…