Well here we go again, the new RE274 cam installed. The cam itself is 274 Duration on the inlet and 270 on the exhaust, but it may come out a few degrees more with the 1.5 Ratio rockers. My Re13…
Tag: Mini
Another In car of Graham racing at the 2015 Phillip Island Classic Little bit wet, a little bit more fun.
Here’s a video of Andrew Bergan from Mini and Moke World have a ball racing in the wet. Slippery and Fun! Thanks to Andrew for the Video from his car. Make sure you go check his website over at www.miniandmokeworld.com.au
Before reading this, I suggest the reader go back and read Project Small Bore Pt1, Pt2, Pt3 as lot of things in that project are relevant to this project. The beginning of the process of building the 68mm project motor…
There has been alot of talk abut cam followers in the mini (A-series) community of late. So I thought it would be a good idea to go through and explain a few things. When you assemble a motor and wind…
In the last article we chose a manifold based on flow volumes, and a carbie based on personal choice, but which combination is best on this engine? With the engine finished, it is time to look at a variety of…
New product 68mm flattop piston to suit 1100/998 motors These pistons are made of 11/12% silicon.These are a very strong piston and will suit race application. The weight comes in at 286g with pin and rings. The pistons are…
Click to enlarge Ok lets take a look at the cylinder head. Here we have three small bore cylinder heads. From left to right we have a AEG295 head (left). This is the performance head for small bores. The second…